| |
 |
 |
Choice of paper
cutting machine |
 |
 |
Inquiries
Inquiries are welcome. Contact us
by phone, by fax,
or by e-mail.
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
Wood
Wood paper for laminated plywood |
Wood
The material is cork |
Felt
Honeycomb |
Paper and
paper craft
Paper |
Paper and
paper craft
Packing |
Paper and
paper craft
Twisted paper string ornament |
Paper and
paper craft
Hard press board |
 |
 |
 |
 |
 |
 |
|
Felt
Wool felt |
Felt
Saran rack filter |
Felt
Cloth felt |
Plastic
Plastic cardboard |
Plastic
Polyester film |
Plastic
Paulownia |
|
 |
 |
 |
 |
 |
 |
 |
Urethane
Urethane resin |
Urethane
Urethane foam |
Rubber
Rubber |
Vinyl
Soft vinyl sheet |
Glass fiber
Glass fiber mat |
Metal
Metal deposition sheet |
PS board
PS board mat |
|
 |
|
Workpiece (material to be cut)：Plastic cardboard, polypropylene |
 |
|
 |
Cutting case, company I
| Material to be cut： |
Plastic cardboard, dan plate, polypropylene, paulownia, metal deposition |
| Cutting machine： |
eRC-200DX,JAC-200CFC |
|
【Key points of cutting】
| Material and angle of cutting edge |
High-speed steel 23° |
| Setting method |
Same as that of cutting machine. Front workpiece loading |
| Clamp (pressing method) |
Gently press |
| Pressure |
4KN |
| Angle at which the cutting edge is lowered |
Standard |
| Method of clamping the cut material |
Immediate release |
| Others |
|
|
|
|
|
ワWorkpiece (material to be cut)：PET, polyester film |
|
 |
Cutting case, company J
| Material to be cut： |
PET, polyester film |
| Cutting machine： |
JAC－160DX |
|
【Key points of cutting】
| Material and angle of cutting edge |
High-speed steel 23° is ground at two steps to 26-28° |
| Setting method |
Same as that of cutting machine. Front workpiece loading |
| Clamp (pressing method) |
Use a clamp pedal to achieve the dimension accuracy |
| Pressure |
20KN |
| Angle at which the cutting edge is lowered |
Standard |
| Method of clamping the cut material |
Immediate release |
| Others |
Inverter-controlled low-speed knife motion |
|
|
|
Workpiece (material to be cut)：Resin, plastic |
|
 |
Cutting case, company W
| Material to be cut： |
Paulownia |
| Cutting machine： |
eRC-200DX、JAC-200CFC |
|
【Key points of cutting】
| Material and angle of cutting edge |
High-speed steel 23° two-step grinding |
| Setting method |
Same as that of cutting machine. Front workpiece loading |
| Clamp (pressing method) |
Gently press |
| Pressure |
4KN |
| Angle at which the cutting edge is lowered |
Standard |
| Method of clamping the cut material |
Immediate release |
| Others |
|
|
|
|
|
|
