Cutting machine.com

Choice of paper
cutting machine

Inquiries

Inquiries are welcome. Contact us
by phone, by fax,
or by e-mail.

TEL：+81-568-67-5311
FAX：+81-568-68-0495
MAIL：info@itotec.co.jp


Wood Wood paper for laminated plywood	Wood The material is cork	Felt Honeycomb	Paper and paper craft Paper	Paper and paper craft Packing	Paper and paper craft Twisted paper string ornament	Paper and paper craft Hard press board

Felt Wool felt	Felt Saran rack filter	Felt Cloth felt	Plastic Plastic cardboard	Plastic Polyester film	Plastic Paulownia

Urethane Urethane resin	Urethane Urethane foam	Rubber Rubber	Vinyl Soft vinyl sheet	Glass fiber Glass fiber mat	Metal Metal deposition sheet	PS board PS board mat

Workpiece (material to be cut)：Wood

Cutting case, company E

Material to be cut：	Wood (material of furniture and music instruments)
Cutting machine：	Cutting machine: JAC-115FC The material is 0.6 to 0.8mm thick and is likely to be affected by moisture.

【Key points of cutting】

Material and angle of cutting edge	High-speed steel 23°
Setting method	Same as that of cutting machine. Front loading.
Clamp (pressing method)	Because of the warp of the material, cut while pressing the material gently with the clamp pedal.
Pressure	Changed to “cut at around 20KN”
Angle at which the cutting edge is lowered	Standard
Method of clamping the cut material	Immediate release
Others

Workpiece (material to be cut)：Wood

Cutting case, company Ｔ

Material to be cut：	Wooden 1.5mm thick plug
Cutting machine：	JAC-115FC

【Key points of cutting】

Material and angle of cutting edge	High-speed steel 23°
Setting method	Same as that of cutting machine. Front loading.
Clamp (pressing method)	Because of the warp of the material, cut while pressing the material gently with the clamp pedal. Needs no consideration. Operation at about 20KN
Pressure	Needs no consideration. Operation at about 20KN
Angle at which the cutting edge is lowered	Standard
Method of clamping the cut material	Immediate release
Others	The material can be cut in a large volume to an identical size, and the dimension is stable unlike those cut with a saw.