Cutting machine.com

Choice of paper
cutting machine

Inquiries

Inquiries are welcome. Contact us
by phone, by fax,
or by e-mail.

TEL：+81-568-67-5311
FAX：+81-568-68-0495
MAIL：info@itotec.co.jp


Wood Wood paper for laminated plywood	Wood The material is cork	Felt Honeycomb	Paper and paper craft Paper	Paper and paper craft Packing	Paper and paper craft Twisted paper string ornament	Paper and paper craft Hard press board

Felt Wool felt	Felt Saran rack filter	Felt Cloth felt	Plastic Plastic cardboard	Plastic Polyester film	Plastic Paulownia

Urethane Urethane resin	Urethane Urethane foam	Rubber Rubber	Vinyl Soft vinyl sheet	Glass fiber Glass fiber mat	Metal Metal deposition sheet	PS board PS board mat

Workpiece (material to be cut)：Urethane foam

Cutting case, company M

Material to be cut：	Urethane foam
Cutting machine：	JAC-160CFC

【Key points of cutting】

Material and angle of cutting edge	High-speed steel double-sided blade
Setting method	Same as paper
Clamp (pressing method)	Do not press when using a double-sided blade
Pressure	4KN
Angle at which the cutting edge is lowered	Standard
Method of clamping the cut material	Immediate release
Others	Soft materials are cut even if they are about 20mm thick. With hard materials, surface resistance causes a problem. The double-sided blade knife may be used. To cope with inclination on the back side of the knife, retract the backgauge when cutting.

Workpiece (material to be cut)：Urethane resin

Cutting case, company O

Material to be cut：	Urethane resin
Cutting machine：	JAC-160CFC

【Key points of cutting】

Material and angle of cutting edge	High-speed steel double-sided blade
Setting method	Same as paper
Clamp (pressing method)	Do not press
Pressure
Angle at which the cutting edge is lowered	Standard
Method of clamping the cut material	Do not use
Others	Soft materials are cut even if they are about 20mm thick. With hard materials, surface resistance causes a problem. The double-sided blade knife may be used. To cope with inclination on the back side of the knife, retract the backgauge when cutting.